The Hidden Danger of a Broken Garage Door Spring
It usually happens when you least expect it. You’re heading out for work, running errands down Hurontario Street, or packing up the car for a weekend trip when you hear a loud, gunshot-like pop from the garage. You try to open the door, but it barely budges, or the opener struggles and groans under immense weight.
If this sounds like you, you probably have a broken garage door spring.
Many homeowners assume the electric opener does all the hard work, but it’s actually the high-tension springs that balance and lift those heavy steel or wood panels. When a spring snaps, your door becomes essentially a dead weight, and attempting to operate it can cause severe damage to your automatic opener, or worse, serious injury.
Why Garage Door Springs Break
Garage door springs are not built to last forever. The vast majority of residential standard springs are rated for approximately 10,000 cycles (a cycle is the door opening and then closing once). This usually means a life span of about 5 to 9 years, depending on how often your household uses the garage.
The most frequently occurring causes of spring failure are:
Wear and tear over time: Steel is weakened as it is constantly being twisted (torsion springs) or stretched (extension springs), causing metal fatigue.
* Rust and Corrosion: Mississauga’s humid summers and salty, slushy winters can lead to surface rust on the coils. This increases friction and greatly shortens the spring’s life. Lack of maintenance: A little preventive care, like spraying the springs with a silicone-based garage door lubricant twice a year, can prevent binding and stave off rust.
Torsion and Extension Springs: What’s The Difference?
There are two spring systems used on residential garage doors:
1. Torsion Springs: They are mounted horizontally on a metal shaft just above the opening of a closed garage door. They store and release incredible torque through a winding action. When they break, you will usually see a clean break in the middle of the coil.
2. Extension springs – extending parallel to the upper tracks on the left and right sides of the door. They inflate and deflate to balance the weight. Since they can break with dangerous force and fly off, safety cables should always be used with them.
Never Do This Alone: Why?
It’s so tempting to find a quick video online and head to the local hardware store to buy a replacement spring. But garage door spring replacement is one of those home repairs that always should be left to the professionals.
The springs are under significant mechanical stress. One slip of a winding bar can mean deep cuts, broken bones or a door that drops completely. Aside from safety risks, a wrong wire gauge or spring length will throw your whole door system out of balance, destroying your garage door tracks, rollers and gears in no time.
Mississauga Spring Replacement Quick & Reliable
Garage Door Spring Repairs in Mississauga and the GTA. We are experts in safe, efficient and durable garage door spring repairs in Mississauga and the GTA. We balance your door to perfection. High-cycle replacement springs are designed to survive the harsh Canadian winters.
Don’t try to open an unbalanced door; it could put your safety or property at risk. If your garage door is stuck, heavy, or you notice a snapped spring, call our local team right away.
Get In Touch With Us Today:
Company Name: Value Garage Doors
* Address: 3620 Kaneff Crescent #203, Mississauga, ON L5A 3X1, Canada
Phone Number: 6473609505
Website: www.valuegaragedoors.ca
Why Your Garage Door Light Won’t Work and How to Fix It
Garage doors might break down at any time. Even with the best garage door opener brands, like LiftMaster, parts can sometimes get stuck or stop working properly. A common problem for homeowners is that their LiftMaster garage door light won’t turn off or on. These flaws won’t harm your garage door system, but they could drain the battery in the light or make you trip in the dark. But you can easily fix these problems.
Read on to find out how to fix problems with your garage door light. If your garage door light won’t turn on or off, consider one of the remedies we give below.
Why won’t the light on my garage door opener turn off?
There is probably something wrong with the motion sensor or light timer on your garage door if you can’t turn off the light. If your garage door light stays on, it’s likely for one of the following reasons:
- Movement is setting off the garage door’s motion sensors. These sensors tell the light switch when to turn on and off automatically.
- Something in the doorway zone keeps turning on the light on your garage door.
- The switch for the light panel is on.
- Sometimes, a broken logic board can make your garage door light stop working, and you’ll need to call a professional to fix it.
How to Fix a Garage Door Light That Won’t Turn Off
It doesn’t take long to figure out why your garage door light won’t turn off, because lights that stay on are usually due to their settings. You may repair the problem of the light staying on by following these instructions:-
Check the Manual
Check your LiftMaster garage door handbook to ensure you know how to use all its features correctly.
Look at the motion sensor.
Check the light function on your motion sensor. To turn it off, go to “Menu” > “Light Settings” > “Automatic Light” > “Motion Sensor” on your control panel. This will turn off the feature. Make sure nothing in your garage that moves on its own triggers the motion sensor.
Check the wall switch and remote control.
Make sure your light switch is on or that your remote control offers options to turn the light on and off. The light switch is on the side of the garage door. If it is on, turn it off.
Check the garage door opener.
Check the garage door opener. Look for anything that could block the sensor or set it off in some other way.
Look for things that might get in the way.
Look around the garage door for anything that might be blocking the sensors.
Check for problems with the wiring.
The wiring in the door might be the problem sometimes. To start, turn your light timer down to its lowest level. Unplug the unit and the wiring from the opener. After a minute and a half, plug the power back in. The lights should come on.
When to Call a Professional
If you still have problems after troubleshooting, don’t feel comfortable fixing the wiring on the logic board yourself, or your garage door opener is making strange noises or acting strangely, you should call a professional for garage door servicing.
Why Won’t My Garage Door Opener Light Turn On?
If your LiftMaster opener light isn’t working and you keep walking into a dark garage, one of these frequent problems could be the cause:
- A light bulb that has burned out
- Bad connections or a light socket
- Problems with the opener for the garage door
- The remote control or wall switch isn’t working right.
- Problems with the wiring or electricity
- Fixing a broken garage door opener light
If the light on your garage door opener stops working, you should go through the following list to figure out what might be wrong:
Troubleshooting a Garage Door Opener Light Failure
Check the light socket: If the lightbulb is fine, look for scorch marks or anything else that seems out of place. Don’t forget to be safe: just look, don’t touch.
Check the garage door opener: Next, check the opener itself for any loose connections or damage.
Check the wall switch and remote control: After inspecting the opener, try turning it on and off with the wall switch. Then, check your instructions to see if your remote has light controls that you can test.
Look for electrical problems on the property. Before you work on wiring or electrical work, turn off the power. Next, check the cables from the opener to the other electrical items for damage.
Get in touch with Value Garage Doors Today.
It’s time to call the experts at Valve Garage Doors if your LiftMaster garage door light won’t turn on or off. You may be sure that we will take care of your problems right away.